Shucky's Kitchen

Thoughts, recipes, neat links...all sorts of things passing through a creative mind! Grab a coffee and pull up a chair!

Sunday, July 28, 2013

I  found this comment on another blog, and thought it too good to pass up. I tried to contact the person who who left it, but she had disappeared, but here goes!

 I thought I would post my little bit of wisdom about Murphy's Oil, gleaned from close to 15 years of using it as a professional housekeeper.

Murphy's Oil Soap (original, concentrated) can be used in two types of solutions:

1/  The way it is on the instructions, with 1/  4 cup to something like 1 gallon of water in a pail. This is good for large projects, including flooring that will accept the excess water.

2/   As a tiny drop in a spray bottle full of water. I prefer this method for both general cleaning, and floor cleaning with a terry cloth mop. It does a great job, and dries in minutes with no towels needed.

Murphy's Oil Soap can be used to clean the following things:

1/  Hardwood Flooring
2/  Tile and laminate flooring
3/  Stone tile flooring (including marble, with a mild dilution in a spray!)
4/  Finished wood furniture
5/  Painted wood furniture
6/  Other painted surfaces such as walls
7/  Wood, melamine, tile, stone (including marble!) countertops and backsplashes(in a spray)
8/  As a scrub booster directly on your sponge, when dealing with soapscum in the bath.
9/  Windows and other glass (with a little extra buffing, and in mild dilution in a spray bottle)
10/  As a spot remover for stains on carpet and upholstery(in a spray)
11/  As a spot pre-treatment for laundry
12/  As an ingredient in homemade liquid laundry detergent
13/  As an ingredient in homemade bug deterrent/  killer solutions in the garden
14/  As a preventative measure against an assortment of fungal infestations in the garden
15/  Dishes, in pinch with lots of rinsing

I have found that, when it comes to flooring (any type), the best way to clean them is by using a microfibre or terry cloth mop, and about half a teaspoon of Murphy's Oil Soap in a full (regular size) spray bottle of water. You get a great clean, and the solution dries in less than 5 minutes, so the water doesn't have a chance to sit on the floor and possibly damage it.

While it's true that vinegar is often good to use as a general cleaner and a floor and window cleaner, there are a few areas where it is inadvisable to use vinegar. If you have flooring that has been sanded and refinished, choose Murphy's (mild, in a spray bottle) over vinegar. The acid in the vinegar will- over time- eat through the re-applied finish. Ask a flooring expert- I did. Also, you can't let water sit on a refinished surface, as excessive water will also damage the finish. Vinegar cannot be used on soft stone tiles that require a mild PH, or PH neutral, cleanser- the acid will etch the surface. Excessive water will etch the surface. Murphy's in a spray bottle works just dandy. :) 


You can use Murphy's on virtually any area of your home, from the ceiling to the windows to the floor, and even in your garden. Vinegar can be used most places, but not everywhere. The two of them together, however, will combat almost any problem in keeping your home clean. :)

0 Comments:

Post a Comment

<< Home